The fields with the red border are required.
Enter Data for Calculations Below
Axial Depth of Cut* Radial Width of Cut*      
In order to calculate Unit Power (Watts /cm³/min) choose the Material you are machining and Tool Condition below:  
Material* :
Tool Condition* :
   
  To complete calculations, enter known data into the empty boxes on the left hand side below. All mandatory fields for calculations are indicated by (*). All calculations are based on industry formulas and are intended to provide theoretical values. Actual results could vary and SGS Tool Company assumes no responsibility.
 
Material Removal Rates Solution
Millimeters per Minute* Axial Depth of Cut Radial Width of Cut Material Removal Rate  
cm³/min
Spindle Kilowatts Solution
Material Removal Rate
Unit Power
Spindle Kilowatts
kW
Motor Kilowatts Solution
Spindle Kilowatts Machine Efficency %* Constant Motor Kilowatts  
100
kW
Spindle Torque Solution
Spindle Kilowatts
Constant Revolutions per Minute* Spindle Torque
9.554
N-m