The fields with the red border are required.
    Enter Data for Calculations Below
    Cutting Tool Diameter*
      To complete calculations, enter known data into the empty boxes on the left hand side below. All mandatory fields for calculations are indicated by (*). All calculations are based on industry formulas and are intended to provide theoretical values. Actual results could vary and SGS Tool Company assumes no responsibility.
    Surface Meters per Minute Solution
    Revolutions per Minute*   Drill Diameter Constant Surface Feet per Minute
    3.14 1000
    Revolutions per Minute Solution
    Surface Meters per Minute   Drill Diameter Constant Revolutions per Minute
    3.14 1000
    Millimeters per Minute Solution
    Millimeters per Revolution* Revolutions per Minute
    Millimeters per Minute
    Millimeters per Revolution Solution
    Millimeters per Minute Revolutions per Minute
    Millimeters per Revolution
    Drilling Time in Minutes Solution
    Depth of Hole in Inches Millimeters per Revolution Revolution per Minute Minutes of Travel
    Proper Drill Diameter for a Cut Thread Solution
    Major Cut Tap Diameter Percentage of Full Thread Tap Pitch
    Drill Diameter
    Proper Drill Diameter for a Formed Thread Solution
    Major Form Tap Diameter
    Forming Tap Pitch Maximum Drill Diameter
    Minimum Drill Diameter